BlazeTech: Engineering Consulting Specialists Consultants (in Cambridge, Massachusetts, USA) with expertise in air dispersion modeling, off-site consequence analysis, fire and explosion, and other safety problems. For dispersion modeling, the firm uses ADORA (Atmospheric Dispersion of Reacting Agents) a model with complex thermodynamics and chemical reactions. http://www.blazetech.com
Extractions: office@blazetech.com Specialists in: Environmental Safety Fire and Explosion Aircraft Survivability Risk Assessment Founded in 1987, BlazeTech, an engineering consulting firm based in Woburn, MA, provides research and development, modeling and simulation, and expert witness services. Our forte is in bridging the gap between theory and practice to solve real problems and develop software and advanced technologies in a timely and cost-effec- tive manner. Technology development includes conceptual designs, proof-of-concept tests, proto- type development, field testing, and analysis. Following is a list of our key areas of specialization: Environmental safety Reactive dispersion using Atmospheric Dispersion Of Reactive Agents (ADORA) model Off-site consequence analysis for Risk Management Planning (RMP) Emissions from industrial conflagrations, rocket launch operations, forest fires, chemical warehouses, and rail cars
AIR DISPERSION MODELING EVALUATION Iowa Department of Natural Resources. Environmental Services Division. Air Quality Bureau . AIR DISPERSION MODELING CHECKLIST. For NonPSD Construction Permit Applications http://www.iowadnr.gov/air/prof/progdev/files/Modeling Checklist.doc
Enviroplan Consulting A consulting firm (headquartered in Fairfield, New Jersey, USA) that offers services in air dispersion modeling, air quality and meteorological monitoring, air pollution emissions estimation, permitting and compliance plans, hazard assessments and risk management plans. http://www.enviroplan.com
Extractions: ECCI engineers have developed procedures to help define enforceable permit limits to control off-site concentrations of criteria pollutants and hazardous air pollutants to allow successful air dispersion modeling demonstrations while retaining reasonable operational flexibility at the source facilities. ECCI engineers have experience with specialty models and protocols to address unique operations and the associated air emissions including using the United States Army Open Burn and Open Detonation Model at multiple facilities. ECCI engineers have combined actual ambient air monitoring results with conventional air dispersion models to demonstrate off-site compliance in complex situations. ECCI has completed complex air dispersion modeling projects with HAP emissions from multiple sources and risk assessment driven off-site limitations for emissions from open detonation of waste rocket propellants. These projects utilized standard EPA modeling proto-cols as well as the United States Army Open Burn and Open Detonation Model.
Air Quality Management Consulting environmental engineering firm located in St. Louis, Missouri, USA. Services include air dispersion modeling, air emission inventories, air permitting and compliance programs. http://www.npnenv.com/air_quality.htm
Extractions: NPN Environmental's diverse air quality management team provides our clients extensive experience and knowledge stemming from multiple disciplines. Led by professional engineers, our air quality professionals include scientists, engineers, and technicians with formal education in chemistry, mathematics, industrial hygiene, and engineering. Because of our experience in multiple disciplines, NPN Environmental has an extensive working knowledge of industrial, commercial, chemical, and mining regulatory requirements. We couple in-depth expertise with qualified techniques for measuring and monitoring air pollution emissions and have established regulatory resources to facilitate and expedite solutions to your air quality needs. Permits and Compliance Programs NPN Environmental prepares permit applications and compliance programs that are fundamental to our clients' operations. Our team of professionals prepares air permit applications including Federally enforceable Title V Operating Permits, State Construction/Operating Permits, and various other permits required by State or local agencies. We proficiently develop compliance programs and strategies by using our extensive experience and knowledge of major Federal and State regulatory air programs. In addition, we expeditiously facilitate permit acquisition through our established regulatory resources.
Liaise Environmental, Inc. A consulting firm based in Dallas, Texas, USA offering air quality permitting and related environmental services including air dispersion modeling. http://www.liaise.org/airquality.html
Air Quality And Environmental Compliance An environmental consulting firm (located in Greenville, South Carolina, USA) whose services include air dispersion modeling, air permitting and air toxics evaluations. http://www.rogersandcallcott.com/environmental.htm
Extractions: h ome about us c ... staff email access we accept: The department head, Ben O'Dell, is a Certified Hazardous Materials Manager. Environmental Compliance Reviews Employee Exposure Monitoring Industrial Noise Survey Environmental Compliance Management Services Air Emission Tracking and Reporting SARA Form R Reports (Toxic Release Inventory) EPCRA Reporting (Tier II) Risk Management Plans Hazardous Waste Management Consulting Discharge Monitoring Reports (DMR) Self-monitoring Reports (SMR) Hazardous Waste Reporting NPDES and Sewer Use Data Tracking Environmental and Safety Compliance Training (click here for more information) Contact Ben O'Dell, CHMM Environmental Compliance Services Phone: email: ben.odell@rogersandcallcott.com
Air Dispersion Modeling Helena, MT p. 406.442.5768 f. 406.449.6653 1.800.571.7346. Billings, MT p. 406.896.1716 f. 406.896.1725 http://www.bison-eng.com/permitting-air-dispersion-modeling.htm
Extractions: Contact Us AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','753','height','138','src','top-banner','quality','high','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','top-banner' ); //end AC code Helena, MT f. 406.896.1725 Permitting Monitoring Testing Other Air Dispersion Modeling demonstrate compliance with State Implementation Plans (SIPs). Our 29+ years of air dispersion modeling experience is extensive and our highly trained team is skilled in the use of all current regulatory models. Bison has the knowledge, expertise and equipment to perform any air dispersion modeling analysis required for your facility. Air Quality Permitting Team Harold W. Robbins
EngConsult: Air Quality A consulting firm based in Brampton, Ontario, Canada (with an office in Dhaka, Bangladesh) whose services include air dispersion modeling. http://www.eng-consult.com/ECservice-AirQuality.htm
Extractions: EngConsult’s air quality services group has potential to manage stationary and mobile sources pollution. EngConsult helps government agencies in the preparation of document, which provide clear instruction on how to demonstrate that a facility meets the requirements of the agency. This guidance material improves regulatory certainty by clarifying the information requirements as well as setting minimum requirements for the format and quality of the documentation required when submitting applications for approval. We help federal and local governments in managing urban air quality issues utilizing state-of-art planning tools. The tool predicts future urban emissions based on forecasted economic growth and energy usage.
Air Dispersion Modeling Guidelines ADEQ MODELING GUIDELINES Page 2 of 63 December 2004 TABLE OF CONTENTS Section Page 1.0 INTRODUCTION http://www.azdeq.gov/environ/air/download/modeling.pdf
Aspen Environmental Group An environmental consulting company based in Agoura Hills, California, USA whose services include air dispersion modeling and air quality impact assessments, air permitting, air toxics studies, and risk assessments. http://www.aspeneg.com
Air Dispersion Modeling Guidelines Air Dispersion Modeling Guidelines For Oklahoma Air Quality Permits Prepared by the Engineering Section of the Permitting Unit Air Quality Division Oklahoma Department of http://www.deq.state.ok.us/aqdnew/permitting/modelguide.pdf
CTI - Services An environmental engineering firm based in Toronto, Ontario, Canada whose services include air dispersion modeling. The dispersion models used include the Ontario Ministry of Environment Regulation 346 model as well as the USA EPA models ISC3 and AERMOD. http://www.churchandtrought.com/services.asp?ID=11
Welcome To Brenk Systemplanung An environmental engineering and consulting firm based in Aachen, Germany whose services include air dispersion modeling. http://www.brenk.com/system/main.htm
Extractions: Same day delivery on many software and data products. SALES PRICING Dispersion Modeling, Analysis, and Visualization Download Version 7.2.5 to get the latest enhancements to the most powerful AERMOD interface available. EXPLORE Remote Free Model multiple sources and pollutants with the brand-new BREEZE SCREEN3 Version 3 Emergency Response The most comprehensive accidental release modeling system for complex and flat terrain terrain situations.
Air Primer An air quality and acoustic consulting firm (based in Plaistow, New Hampshire, USA) whose services include air dispersion modeling. http://airandnoise.com/AirPrimer.html
Extractions: Pollutants and Standards The U.S. Environmental Protection Agency (EPA) has set forth standards for a set of pollutants that it refers to as the criteria pollutants. These standards are referred to as the National Ambient Air Quality Standards (NAAQS) and were promulgated to protect human health and welfare with an adequate margin of safety. The criteria pollutants include: • Carbon Monoxide (CO) Air Quality Impact Modeling For many facilities, a critical step in the permitting process is the air quality modeling analysis. These types of analyses use computer models to assess the potential impact of a facility on air quality. These models, which were developed by the EPA, use a complex set of data inputs to predict a conservatively estimated air quality impact for the facility of interest. Inputs to these models include information about the facility itself, representative meteorological data, and the topography of the area surrounding the facility. Using this information, these models predict the expected concentration of the pollutants associated with the operation of the facility in question. Modeled pollutant concentrations are then compared with the NAAQS and/or applicable toxic air pollutant standards.
Extractions: Home Services Equipment Search ... Stack / Source Emissions Testing SEARCH BY Industry Method Air Dispersion Modeling - Case Study Air dispersion modeling can be used to predict the concentration of criteria pollutants at specified ground-level receptors around an emission source. The air quality impact of stationary sources can be estimated using EPA approved air dispersion models. Dispersion models are used to determine concentrations of pollutants generated from Point, Area and Fugitive sources. Fence line monitoring may be required for long term compliance. Some of the various State and Federal regulations that impact the need for Modeling and provide baseline compliance include: CleanAir is experienced in the application of EPA-approved models for criteria pollutants. We have been successful providing compliance results using the refined dispersion models, including the EPA preferred AERMOD Modeling System, for point source emissions and fugitive sources. With our expertise in conducting Point Source and Ambient testing and our in-depth understanding of the model inputs and variables, CleanAir can provide a successful modeling system approach. Fugitive sources can be modeled for to determine compliance with NSPS or NAAQS.
